Supported devicetypes and their possible settings
Here you can find a list of all supported devicetypes and their corresponding and possbile settings.
Networkswitch
Possible settings:
Common Settings
Hostname
Name: Hostname
Type: Textfield
Default: {{name}}
Description:
The hostname of the switch. Type '_reset_' for deleting the hostname. Use '{{name}}' for inventory name.
VLANs
Description
VLANS are seperate virtual networks. They devide a switch into multiple smaller switches. With the following section you can add vlans to your switch. If you want to use a trunk, please keep in mind that you have to add all vlans that are going to be send over the trunk. Vlans do not get deleted! Vlan 1 is reserved for managment usage.
This setting is a list which can hold following fields:
Name: Name
Type: Textfield
Default: Vlan
Validation:
Only Letters and Numbers are allowed. No whitespaces, hyphens or underscores.
Name: id
Type: Number
Min: 2
Max: 4096
Default: 2
Name: VLAN Type
Type: Dropdown
Default: 1
Choices:
- Data
- sACN
- ArtNet
- Dante
- NDI
Ports
Description
In this section, you can manage and configure individual switch ports. For each port, you must specify the port ID, whether it is a trunk port and to which vlan the port should belong. If it is a trunk port, the vlan id is the native vlan id of the trunk.
This setting is a list which can hold following fields:
Name: id
Type: Number
Min: 1
Max: 52
Default: 1
Name: Trunk Port
Type: Checkbox
Name: Untagged VLAN
Type: Number
Default: 1
Save
Name: Save configuration
Type: Checkbox
Default: true
Description:
Wether to save the configuration at the end.
DMX-Router
Possible settings:
Route-DMX
Routings
Description
In this section you can add routes to the LumiCore
This setting is a list which can hold following fields:
Name: Group
Type: Dropdown
Default: 0
Choices:
- Any
- sACN In
- ArtNet In
Name: Process Engine ID
Type: Number
Min: 1
Default: 1
Name: Protocol
Type: Dropdown
Default: artnet
Choices:
- sACN
- ArtNet
Name: Universe
Type: Number
Min: 1
Max: 9999
Default: 1
Name: Protocol
Type: Dropdown
Default: artnet
Choices:
- sACN
- ArtNet
Name: Universe
Type: Number
Min: 1
Max: 9999
Default: 1
DMX-Node
Possible settings:
General Settings
Hostname
Name: Hostname
Type: Textfield
Default: {{name}}
Description:
The hostname of the node. Type '_reset_' for deleting the hostname. Use '{{name}}' for inventory name.
Ports
Description
In this section, you can manage and configure individual ports. For each port, you must specify the port ID and the universe number it should output.
This setting is a list which can hold following fields:
Name: id
Type: Number
Min: 1
Max: 52
Default: 1
Name: Protocol
Type: Dropdown
Default: 1
Choices:
- sACN
- ArtNet
Name: Universe
Type: Number
Min: 1
Max: 9999
Default: 1
© 2024 CX-Networks GmbH
Version: 1.4.2